The List of objective type Civil Engineering Surveying questions and answers for interview and entrance examinations for all B.A, B.Tech, M.Tech Students.
11. If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures is more than the sum of the east departures, the bearing of the closing line is in the
a) NE quadrant
b) SE quadrant
c) NW quadrant
d) SW quadrant
Ans: b
12. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be
a) +50 m, +86.6 m
b) +86.6 m, -50 m
c) +50m, -86.6 m
d) +70.7 m,-50 m
Ans: b
13. If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is
a) 7.5 m
b) 25 m
c) 50
d) 75 m
Ans: d
14. The angle between the prolongation of the preceding line and the forward line of a traverse is called
a) deflection angle
b) included angle
c) direct angle
d) none of the above
Ans: a
15. Transit rule of adjusting the consecutive coordinates of a traverse is used where
a) linear and angular measurements of the traverse are of equal accuracy
b) angular measurements are more accu¬rate than linear measurements
c) linear measurements are more accurate than angular measurements
d) all of the above
Ans: b
16. For a tacheometer the additive and multi-plying constants are respectively
a) 0 and 100
b) 100 and 0
c) 0 and 0
d) 100 and 100
Ans: a
17. Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations ?
a) measuring angle and distance from one transit station
b) measuring angles to the point from at least two stations
c) measuring angle at one station and distance from other
d) measuring distance from two points on traverse line
Ans: b
18. Subtense bar is an instrument used for
a) levelling
b) measurement of horizontal distances in plane areas
c) measurement of horizontal distances in undulated areas
d) measurement of angles
Ans: c
19. Horizontal distances obtained by tacheometric observations
a) require slope correction
b) require tension correction
c) require slope and tension corrections
d) do not require slope and tension cor-rections
Ans: d
20. The number of horizontal cross wires in a stadia diaphragm is
a) one
b) two
c) three
d) four
Ans: c
Read More:-
Surveying Multiple choice Questions and Answers Part1
Surveying Multiple choice Questions and Answers Part2
Surveying Multiple choice Questions and Answers Part3
Surveying Multiple choice Questions and Answers Part4
Surveying Multiple choice Questions and Answers Part5
Surveying Multiple choice Questions and Answers Part6
Surveying Multiple choice Questions and Answers Part7
Surveying Multiple choice Questions and Answers Part8
Surveying Multiple choice Questions and Answers Part9
Surveying Multiple choice Questions and Answers Part10
Surveying Objective type Questions and Answers List
 |
| Surveying Multiple choice Questions and Answers |
a) NE quadrant
b) SE quadrant
c) NW quadrant
d) SW quadrant
Ans: b
12. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be
a) +50 m, +86.6 m
b) +86.6 m, -50 m
c) +50m, -86.6 m
d) +70.7 m,-50 m
Ans: b
13. If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is
a) 7.5 m
b) 25 m
c) 50
d) 75 m
Ans: d
14. The angle between the prolongation of the preceding line and the forward line of a traverse is called
a) deflection angle
b) included angle
c) direct angle
d) none of the above
Ans: a
15. Transit rule of adjusting the consecutive coordinates of a traverse is used where
a) linear and angular measurements of the traverse are of equal accuracy
b) angular measurements are more accu¬rate than linear measurements
c) linear measurements are more accurate than angular measurements
d) all of the above
Ans: b
16. For a tacheometer the additive and multi-plying constants are respectively
a) 0 and 100
b) 100 and 0
c) 0 and 0
d) 100 and 100
Ans: a
17. Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations ?
a) measuring angle and distance from one transit station
b) measuring angles to the point from at least two stations
c) measuring angle at one station and distance from other
d) measuring distance from two points on traverse line
Ans: b
18. Subtense bar is an instrument used for
a) levelling
b) measurement of horizontal distances in plane areas
c) measurement of horizontal distances in undulated areas
d) measurement of angles
Ans: c
19. Horizontal distances obtained by tacheometric observations
a) require slope correction
b) require tension correction
c) require slope and tension corrections
d) do not require slope and tension cor-rections
Ans: d
20. The number of horizontal cross wires in a stadia diaphragm is
a) one
b) two
c) three
d) four
Ans: c
Read More:-
Surveying Multiple choice Questions and Answers Part1
Surveying Multiple choice Questions and Answers Part2
Surveying Multiple choice Questions and Answers Part3
Surveying Multiple choice Questions and Answers Part4
Surveying Multiple choice Questions and Answers Part5
Surveying Multiple choice Questions and Answers Part6
Surveying Multiple choice Questions and Answers Part7
Surveying Multiple choice Questions and Answers Part8
Surveying Multiple choice Questions and Answers Part9
Surveying Multiple choice Questions and Answers Part10
No comments:
Post a Comment