91. In Question no. 89, the R.L. of last point
a) is greater than R.L. of first point
b) is same as R.L. of first point
c) is smaller than R.L. of first point
d) cannot be determined from the given data
Ans: c
92. The type of surveying which requires least office work is
a) tacheomefry
b) trigonometrical levelling
c) plane table surveying
d) theodolite surveying
Ans: c
93. Intersection method of detailed plotting is most suitable for
a) forests
b) urban areas
c) hilly areas
d) plains
Ans: c
94. Detailed plotting is generally done by
a) radiation
b) traversing
c) resection
d) all of the above
Ans: a
95. Three point problem can be solved by
a) Tracing paper method
b) Bessels method
c) Lehman's method
d) all of the above
Ans: d
96. If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures is more than the sum of the east departures, the bearing of the closing line is in the
a) NE quadrant
b) SE quadrant
c) NW quadrant
d) SW quadrant
Ans: b
97. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be
a) +50 m, +86.6 m
b) +86.6 m, -50 m
c) +50m, -86.6 m
d) +70.7 m,-50 m
Ans: b
98. If the horizontal distance between the staff point and the point of observation is d, then the error due to curvature of earth is proportional to
a) d
b) 1/d
c) d2
d) 1/d2
Ans: c
99. Sensitiveness of a level tube is designated by
a) radius of level tube
b) length of level tube
c) length of bubble of level tube
d) none of the above
Ans: a
100. Which of the following statements is in-correct ?
a) Error due to refraction may not be completely eliminated by reciprocal levelling.
b) Tilting levels are commonly used for precision work.
c) The last reading of levelling is always a foresight.
d) All of the above statements are incorrect.
Ans: d
Read More:-
Surveying Multiple choice Questions and Answers Part1
Surveying Multiple choice Questions and Answers Part2
Surveying Multiple choice Questions and Answers Part3
Surveying Multiple choice Questions and Answers Part4
Surveying Multiple choice Questions and Answers Part5
Surveying Multiple choice Questions and Answers Part6
Surveying Multiple choice Questions and Answers Part7
Surveying Multiple choice Questions and Answers Part8
Surveying Multiple choice Questions and Answers Part9
Surveying Multiple choice Questions and Answers Part10
a) is greater than R.L. of first point
b) is same as R.L. of first point
c) is smaller than R.L. of first point
d) cannot be determined from the given data
Ans: c
92. The type of surveying which requires least office work is
a) tacheomefry
b) trigonometrical levelling
c) plane table surveying
d) theodolite surveying
Ans: c
93. Intersection method of detailed plotting is most suitable for
a) forests
b) urban areas
c) hilly areas
d) plains
Ans: c
94. Detailed plotting is generally done by
a) radiation
b) traversing
c) resection
d) all of the above
Ans: a
95. Three point problem can be solved by
a) Tracing paper method
b) Bessels method
c) Lehman's method
d) all of the above
Ans: d
96. If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures is more than the sum of the east departures, the bearing of the closing line is in the
a) NE quadrant
b) SE quadrant
c) NW quadrant
d) SW quadrant
Ans: b
97. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be
a) +50 m, +86.6 m
b) +86.6 m, -50 m
c) +50m, -86.6 m
d) +70.7 m,-50 m
Ans: b
98. If the horizontal distance between the staff point and the point of observation is d, then the error due to curvature of earth is proportional to
a) d
b) 1/d
c) d2
d) 1/d2
Ans: c
99. Sensitiveness of a level tube is designated by
a) radius of level tube
b) length of level tube
c) length of bubble of level tube
d) none of the above
Ans: a
100. Which of the following statements is in-correct ?
a) Error due to refraction may not be completely eliminated by reciprocal levelling.
b) Tilting levels are commonly used for precision work.
c) The last reading of levelling is always a foresight.
d) All of the above statements are incorrect.
Ans: d
Read More:-
Surveying Multiple choice Questions and Answers Part1
Surveying Multiple choice Questions and Answers Part2
Surveying Multiple choice Questions and Answers Part3
Surveying Multiple choice Questions and Answers Part4
Surveying Multiple choice Questions and Answers Part5
Surveying Multiple choice Questions and Answers Part6
Surveying Multiple choice Questions and Answers Part7
Surveying Multiple choice Questions and Answers Part8
Surveying Multiple choice Questions and Answers Part9
Surveying Multiple choice Questions and Answers Part10
I just want to thank you for sharing your information and your site or blog this is simple but nice Information I’ve ever seen i like it i learn something today. 3d Photogrammetry Perth
ReplyDelete